Luxury Doc M Pack Low Level

Grab- Rails.com > Doc M Packs > Luxury Doc M Pack Low Level

Items:
Value:

View Cart |Checkout

Grab Rails

New Mobility Products

Outdoor Grab Rails

Bidet Shower Toilet Seats

Raised Toilet Seats

Rollators

Showering and Bathing

Hinged Grab Rail - Ideal for domestic and commercial use.

Colostomy Shelves - Ideal For Commercial and doc m use.

Shower Doc M Pack - Ideal for commercial and domestic use. Grab Rails come in either white, blue or stainless steel

Disabled Alarm Kit - Get yours today!

VAT Exemption

Doc M Pack Low Level Ref: Doc-STR-LL

Doc M Pack Includes

1 x 480mm Low Level Pan, Cistern and Flush Pipe

Chrome Spatula Flushing Lever, British Water Reg. Fittings

Ring Seat

450 x 340 wall Basin & Brackets

Sequential Mono mixer, waste & bottle trap - WRAS approved

5 x Grab Rails

1 x Hinged Arm Support with integral toilet roll holder

1 x 430 x 260 Back Rest Rail & Cushion (supplied with low level pack only)

TMV 2 & 3 valves available as extras

Cisterns are side entry inlet as standard but can be modified to accommodate alternatives

Please Note The Doc M Pack Does Not Include
-Soap Dispenser
-Tissue Dispenser
-Hand Dryer

About Doc M Pack

Grab Rails

Epoxy polyester powder coated grab rails, mixer tap and flushing lever not recommended for use in temperatures below 1°Celsius (33.8° Fahrenheit)

Bottle Trap

32mm Telescopic Nuflo basin bottle trap (38mm seal), as per Building Regulations 1991 Approved Document H, not to be installed any further than 3 metres from soil stack. Requires 75mm trap seal water depth. Manufactured to BS3943

Inlet Valve

Inlet valve is fitted with high pressure valve seat as standard; working pressures from 3 bar to 14 bar static. - Alternative low pressure valve seat can be found in spares pack and will allow an operating range of 0.01 bar to 3 bar.

Mixer Tap

-Minimum operating pressure is 0.2 bar with a maximum operating pressure of 5 bar. N.B: Mixer flow rate at 0.2 bar is 3 litres per minute.

Thermoset Ring Seat

- Split resistant seat with top fittings manufactured to withstand approx: 158 kgs of weight

£525.00 ex VAT
£630.00 inc VAT